- Magnaloy Products
Store
This Store Front will allow you to
enter your Magnaloy Product order directly to Magnaloy. Payment
will be processed using your credit card information entered during the
checkout process and a confirmation of the order and ship date will be
emailed to you.
Magnaloy Special Application Couplings
- these couplings are a collection of specially modified couplings
designed for customer applications. New products will be added in
this area as interest dictates.
-
- Beaver Motor Home
Couplings - connects
the output of the engine to a pump to circulate coolant through a remote
mounted radiator.
The Model 500 was the original
coupling selected by the Beaver Motor Home manufacturer for this
application. The pump is mounted to a welded bracket assembly which
is mounted to the engine to provide alignment of the engine drive and
pump. Due to loading and difficulty in providing accurate alignment
of the pump and engine via this bracket, some owners have experienced
coupling insert failure. If this insert is not changed, failure of
the coupling hubs will result. Accurate alignment of the couplings
hubs is required for extended insert life. Magnaloy provides the
original Model 500 modified coupling for replacement in this application.
The original Driven Side coupling is a 1.00" Smooth Bore and 1/4" Keyway
to fit on the pump shaft. The Drive Side is a Special flange mount
configuration to mate with the engine output flange.
-
- There are some Beaver Motor Homes
which have a Splined Shaft
on the Driven Side (Pump Side). The Coupling to mate to this
situation is the same as the original except it is broached with a 15
tooth 16/32 spline bore. This configuration is available in the
Model 500 size hub.
-
-
Magnaloy has also modified a Model 600
coupling for this application to provide greater loading capabilities and
increased insert life. The modified 600 provides the same
pilot and mounting bolt configuration, steel bushing, clamp, bore size and
overall length as the Model 500 originally specified. The user will
have to determine if their application will allow the additional outside
diameter clearance required for the Model 600 Coupling (OD of Model 500 =
4.80" and OD of Model 600 = 5.98"). The Model 600 hub or
Insert is not compatible with the Model 500 hub or insert, so if changing
to the Model 600 Coupling, both hubs and an insert will be required for
the initial replacement.
-
-
Note: this is a SPECIAL coupling and
as such is NON-RETURNABLE and may require additional shipping time of up to 2
weeks.
-
