magnaloy coupling
company
A Division of Douville Johnston Corporation

Products

Hydraulic Manifolds
& Manifolding
Accessories

Inline Bar Manifolds

Integrated Circuit Manifolds

D05 Tank Line Feed
Control Manifolds

D05 Feed Control
Manifold - Cylinder
Port Meter Out

D05 Solenoid Activated

Regeneration Module

D08 Hi-Lo Pressure
Operated Unloading
Manifold

Subplates

Cover Plates

Valve Adaptors

Accessories

Reference

Shop On-Line

Disclaimer

Literature
Request

The integrated circuit manifold, Number IC-A08x21-0 and IC-S08x21-0, provides a classic Hi-Lo system for use with a double pump.  At low pressures, the flows of both pumps are combined to give maximum machine speed.   During a holding, clamping, or slow speed operating cycle, the output of one pump (the "low-pressure pump") is unloaded to tank to conserve horsepower while the other pump (the "high-pressure pump") provides system flow.  A "high-pressure" relief valve limits maximum system pressure.  An internal check valve (included) prevents "high pressure" flow from escaping through the unloading valve. Valves Required V1- 3/4" Relief Valve (Interchangeable with Vickers CG06) V2- 1 1/4" Unloading Valve (NFPA P10) (A 3/4" unloading valve (NFPA P06) may be used with adaptor plate VA06-35 ordered separately.) V3- 3/4" Directional Control Valve (NFPA D08)

Note: For Mounting Bracket (BK-IC08)Dimensions

magnaloy coupling company   P.O. Box 455 Alpena, MI 49707   989-356-2186

A Division of Douville Johnston Corporation                                                     Fax: 989-354-4190

magnaloy@magnaloy.com       sales@magnaloy.com       support@magnaloy.com     engineering@magnaloy.com      webmaster@magnaloy.com