- Magnaloy offers an extensive line of Inline Bar Manifolds for
mounting a single or several NFPA valves to single Pressure
and Tank return ports. The basic bar manifold provides top mounting of a
specified NFPA valve with A & B port access for each valve on the face
and Pressure and Tank ports on each end of the manifold. Manifold
designs include Parallel Circuits in Standard or High Flow and Series
Circuits. Manifold mounting is accomplished utilizing top located
counterbored through holes and threaded end mounting holes for use with
the "L" Bracket or Flange Mount. NFPA patterns include D03, D05,
D05E Alt A, D05H Alt B and D08. Port Thread types include NPTF
Pipe, SAE O-Ring, BSPP British Parallel, BSPT British Taper and Metric
thread standards. Valve spacing options include 2 inch, 2 1/8 inch
and 4 inch with the D03 pattern, 3 1/4 inch and 5 inch with the D05
pattern, and 5 1/4 inch and 7 inch with the D08 pattern. Options
include Bottom Ports, Relief Valve Cavities, Gauge Ports, Oversize
Ports, "L" Ports, Metric Threading for valve mounting, and isolation
Subplates - Magnaloy
Subplates provide several options in port orientation. The
Standard Subplate provides top mounting of a specified NFPA valve, A & B
ports on one face and Pressure and Tank ports on the opposite face.
NFPA patterns include D03, D05 and D08 and Port Threads are available in
NPTF Pipe, SAE O-Ring, BSPP British Parallel, BSPT British Taper and
Metric thread standards. Options include Bottom Pressure and Tank
ports, Relief Valve Cavities, Perimeter Porting with a port on each
face, Down Side Porting with all ports on the bottom surface, and Metric
Threading for valve mounting.
Cover Plates -
Magnaloy Cover Plates are available in two designs, the Parallel
Blank-Off seals and isolates all ports of the NFPA pattern and the
Series Blank-Off connects the Pressure and Tank ports and seals and
isolates all other ports of the NFPA pattern. Available in D03,
D05 and D08 patterns with optional Gauge Ports to monitor Pressure
and Tank signals.
- Magnaloy Valve Adaptors are used when it is necessary to adapt a NFPA
valve pattern to a smaller NFPA valve pattern. These adaptors are
available in several combinations of NFPA valve patterns.
- Magnaloy Accessories in the Manifold product line include Orifice
Plates and Tapping Plates.
provide for customer drilling of holes in the NFPA pattern and are
available in NFPA D03, D05 and D08 patterns.
Tapping Plates mount between the NFPA
valve and a mounting surface to provide additional ports, where needed,
for external signal connections. Tapping Plates are available in
NFPA D03, D05 and D08 patterns with NPTF Pipe, SAE O-Ring, BSPP British
Parallel, BSPT British Taper, or Metric port threads. Port
configurations include No Ports, Perimeter Ports with a port on each of
the 4 sides, Pressure & Tank ports on opposite sides, or A & B ports on
- Magnaloy Header Manifolds provide multiple side port outlets
with a common end port inlet. They are available in 0 degree, 180 degree,
or 270 degree port angle configurations and various NPTF Pipe and SAE
O-Ring inlet and outlet thread sizes.
- Magnaloy Junction Manifolds provide multiple isolated inlet and outlet
ports to accommodate varying port thread sizes and/or port orientations.
They are available in 90 degree, 180 degree, or 270 degree port angle
configurations and various NPTF Pipe and SAE O-Ring inlet and outlet