| Inline
Bar Manifolds |
| Isolation
Plugs |
 |
- Suitable for mild steel or aluminum manifolds
- Leakfree
- Blocks pressure from both sides
- Permanent
- May be inserted to any depth in blind or thru holes
- Installed at factory by Magnaloy
ORDERING DATA
Specify proper plug no., and location(s) required in manifold.
Multiple plugs can be used to isolate pressure line or tank line
flows to or from various valve stations. |
 |
Installation
Instructions for Customer Installed Isolation Plugs
(For installation in Aluminum Manifolds Only)
1. Make sure the correct plug
is being used for the size of manifold and passage.
2. Insert the plug into the
pressure or tank passage to proper depth between the valve stations being isolated.
3. Tighten the socket head cap
screw to the specified torque setting while holding the other end of plug using the
screwdriver slot provided.
4. If more than one plug is
being installed in a given passage, insert a screwdriver through the customer machined
auxiliary ports to secure other end of plug while tightening.
Isolation Plugs for Customer Installation:
Customer must supply Magnaloy with I.D. dimension of
passage to be isolated if ordering for previously supplied manifold.
Isolation Plugs for Aluminum Manifolds:
Customer assumes all responsibility and liability
resultig from Isolation Plugs shipped loose for installation by customer.
Isolation Plugs for Steel Manifolds:
Must be installed by Magnaloy.
CAUTION:Be sure the isolation plug
does not block the inlet or outlet port of the valve stations. Do not use with steel
manifolds.
NFPA
MANIFOLD
SIZE |
SYSTEM
PASSAGE |
PLUG
PART NUMBER
FOR ALL ALUMINUM MANIFOLDS |
PLUG
PART NUMBER
FOR ALL STEEL MANIFOLDS |
| MAGNALOY |
MANTECH |
TORQUE SETTINGS* |
MAGNALOY |
MANTECH |
| DO3 Original Design |
Pressure & Tank |
IP-AP03-0 |
7562-01 |
480 in. lbs. |
IP-SP03-0 |
7561-01 |
| DO3 High Flow |
Pressure & Tank |
IP-AP03-1 |
7562-06 |
480 in. lbs. |
IP-SP03-1 |
7561-06 |
| DO5 |
Pressure |
IP-AP05-0 |
7562-02 |
960 in. lbs. |
IP-SP05-0 |
7561-02 |
| |
Tank |
IP-AT05-0 |
7562-03 |
1,200 in. lbs. |
IP-ST05-0 |
7561-03 |
| DO5 High Flow |
Pressure |
IP-AP08-0 |
7562-04 |
1,680 in. lbs. |
IP-SP08-0 |
7561-04 |
| |
Tank |
IP-AT05-1 |
7562-07 |
1,680 in. lbs. |
IP-ST05-1 |
7561-07 |
| DO8 |
Pressure |
IP-AP08-0 |
7562-04 |
1,680 in. lbs. |
IP-SP08-0 |
7561-04 |
| |
Tank |
IP-AT08-0 |
7562-05 |
1,680 in. lbs. |
IP-ST08-0 |
7561-05 |
NFPA
D03 Directional Valves in Parallel Circuits
NFPA D03 Directional
Valves in Series Circuits
NFPA D05 Directional
Valves in Parallel Circuits
NFPA D05 Directional
Valves in Series Circuits
NFPA D05 High
Flow Directional Valves in Parallel Circuits
NFPA D05 Alt.A Directional
Valves in Parallel Circuits
NFPA DO5H Alt. B Directional
Valves in Parallel Circuits
NFPA D08 Directional
Valves in Parallel Circuits
NFPA D08
Directional Valves in Series Circuit
Isolation Plugs
Mounting
Flange & Mounting Bracket Kits
Inline Bar
Manifolds | Intergrated
Circuit Manifolds
Subplates | Cover Plates | Valve Adaptors
Accessories | Reference
Products |
Shop
On-Line |
Contact Us | Site Index
|
Site
Search
Magnaloy Home Page
This Page Last
Modified:
August 07, 2003 03:57 PM |
