|
|
Power Unit design is greatly simplified by use of the Magnaloy Pump
Mount. Direct mounting of flange-mount pumps to NEMA C'face motors or Pilot mount
engines via a Magnaloy Mount assures accurate shaft alignment and eliminates the need for
a coupling guard, foot brackets, shims, risers and mount plate. The result is the
easiest to install, most accurate and cost effective method available to mount a pump to a
drive unit.For over 30 years Magnaloy has
produced the highest quality flexible drive couplings in the industry. Magnaloy's
long tradition of high quality and immediate delivery has become an industry goal for
other manufacturers to attain. Every mount Magnaloy manufactures is guaranteed to be
within .003 inch concentric from the motor pilot to pump pilot. Further, the
mounting faces are parallel to each other and perpendicular to the pilot centerline within
.002 inch. These exacting tolerances mean accurate shaft alignment which helps
prolong bearing, seal and coupling life in addition to reducing noise and vibration.
Other mount manufacturers talk about quality, but Magnaloy puts it in writing with
measurable standards (See Illustration A).
| Magnaloy is the most complete,
single source for Horizontal, Vertical and Engine requirements. A large
selection of SAE and Metric pump mounting flanges to NEMA motors and I.C. Engines in a
variety of lengths are available from stock for immediate shipment. OR special
requirements can be met from our complete offering of Welded Steel Mounts. Whatever
your mounting needs, you need look no further than Magnaloy. |
 |
|
Illustration A |
| TABLE 1 - Magnaloy Flexible Drive Couplings |
 The following basic
Rating & Dimensional data is provided for general selection assistance. Complete
selection specifications for standard and semi-standard bores, spline bores, clamp and
steel bushing options and installation instructions are included in the Magnaloy Coupling Catalog - available upon
request. |
|
|
| Coupling
Model |
Max
Bore
(inches) |
HP Rating
Per 100 RPM
(STD insert) |
HP Rating
Per 100 RPM
(Urethane insert) |
HP Rating
Per 100 RPM
(Hytrel insert) |
|
A |
B |
C |
D |
|
W(Min) |
X(Max) |
| 100 |
1 1/8 |
.55 |
.82 |
1.65 |
2.54 |
2.60 |
2.00 |
.56 |
|
1/16 |
.90 |
| 200 |
1 3/8 |
.64 |
.96 |
1.92 |
3.10 |
2.90 |
2.25 |
.68 |
|
1/16 |
.90 |
| 300 |
1 5/8 |
1.12 |
1.68 |
3.36 |
3.58 |
3.45 |
2.90 |
.78 |
|
1/16 |
.98 |
| 400 |
1 7/8 |
1.69 |
2.50 |
5.10 |
4.24 |
3.98 |
3.05 |
1.00 |
|
1/16 |
1.20 |
| 500 |
2 3/8 |
3.50 |
5.30 |
10.50 |
4.67 |
4.80 |
4.00 |
1.04 |
|
1/16 |
1.41 |
| 600 |
2 5/8 |
7.90 |
11.90 |
23.70 |
5.98 |
5.98 |
4.50 |
1.60 |
|
1/16 |
1.36 |
| 700 |
2 7/8 |
18.60 |
27.90 |
46.50 |
6.99 |
6.90 |
5.19 |
2.08 |
|
1/16 |
1.97 |
Quick
Selector Guide
General Information
SAE & Metric Mounts
Horizontal Pump/Motor Mounts
Vertical Pump/Motor Mounts
Pump/Engine Mounts
Welded Steel Mounts
Horizontal Welded Steel Mounts
Vertical Welded Steel Pump/Motor Mounts
Welded Steel Pump/Engine Mounts
Back to the
Magnaloy Home Page
Products |
Shop
On-Line |
Contact Us | Site Index
|
Site
Search
Magnaloy Home Page
This Page Last
modified:
August 07, 2003 04:07 PM
|
