|
|
| Vertical Pump/Motor
Mounts |
MAGNALOY'S VERTICAL PUMP/MOTOR MOUNTS are designed to
allow direct mounting through the reservoir top. The pump and mount assembly is enclosed
inside the reservoir resulting in a safer, quieter more compact installation. Vertical
mounts are available in NEMA C'face motor frame sizes 56C through 256TC to most SAE and
Metric 2 and 4 bolt pumps flanges. Two mounting options are available to give added
flexibility in vertical power unit design.
A MOUNT KIT is included which contains all bolts and washers
required to attach the pump and motor to the mount. The kit DOES NOT contain hardware for
attaching the mount to the reservoir.
Vertical Mount Selection Method
- Check TABLES 2 thru 5 to
determine pump flange size.
- Measure the pump shaft length from the shaft end to the flange
mounting face and ADD to the motor shaft length shown in TABLE 6. An additional 1/16 inch
(minimum) is recommended for shaft end clearance.
- Determine mounting option desired as shown in Illustration B, C, D, and E depending on
the NEMA frame size.
- Refer to the appropriate TABLE (7, 8A, 12, or 13) according to NEMA motor frame size and locate the applicable pump
flange selection from STEP 1, above. NOTE, Option A for vertical mounting NEMA 182TC thru
256TC is applicable ONLY to SAE-A and smaller pump flanges.
- Select the mount length option (dimension "XM" or
"M" in tables) based on the minimum length determined in STEP 2, above.
- Check for proper clearance between the mount inner surfaces and the
coupling O.D. (dimension "Z" and "CL" in tables). Dimensional
data for Magnaloy Couplings is shown in TABLE 1
for reference. A complete Magnaloy Coupling catalog is available upon request.
NEMA Frame 56C thru 145TC Vertical
Mounting
| OPTION A |
OPTION B |
|
|
|
| Illustration
B |
Illustration C |
This economical vertical mounting option allows Tank
Top Drop-thru mounting for ease of assembly and utilizes the standard horizontal mount and
a sealing gasket.
To order OPTION A, specify the Horizontal Pump/Motor Mount number from TABLE 7 and Vertical Gasket number
M056VG. |
This mounting option requires inside tank access to
position the mount/pump sub-assembly through the tank top opening.
To order OPTION B, specify the Vertical Pump/Motor Mount number from TABLE
12 followed with the letter 'V' as shown in TABLE 12. No
gasket is required with this mounting option. |
TABLE 12 - NEMA Frames 56C, 143TC/145TC, 182UC/184UC
| MOTOR END DATA |
RADIAL CLEARANCE
"Z" = 4.15 |
| AJ |
BF |
BD |
AK |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 5.88 |
7/16 |
6.81 |
4.501 |
XAK |
XAJ2 |
XBF2 |
XAJ4 |
XBF4 |
MOUNT NO. |
CL |
XM |
MOUNT NO. |
CL |
XM |
MOUNT NO. |
CL |
XM |
| USA4F17 |
4
Bolt |
1.782 |
|
|
2.84 |
5/16-18 |
M056354FV |
2.81 |
3.50 |
M056424FV |
3.56 |
4.25 |
M056454FV |
4.25 |
4.50 |
| SAE AA |
2
Bolt |
2.001 |
3.25 |
3/8-16 |
|
|
M056352AAV |
2.81 |
3.50 |
M056422AAV |
3.56 |
4.25 |
M056452AAV |
4.25 |
4.50 |
| SAE A |
2(4)
Bolt |
3.251 |
4.19 |
3/8-16 |
4.12 |
3/8-16 |
M056352AV |
2.81 |
3.50 |
M056422AV |
3.56 |
4.25 |
M056452AV |
4.25 |
4.50 |
| 80 A2/B4 |
2(4)
Bolt |
80.01mm |
109mm |
3/8-16 |
103mm |
5/16-18 |
M0563580MV |
2.81 |
3.50 |
M0564280MV |
3.56 |
4.25 |
M0564580MV |
4.25 |
4.50 |
| 80 S4 |
4
Bolt |
80.01mm |
|
|
100mm |
5/16-18 |
M0563580MSV |
2.81 |
3.50 |
M0564280MSV |
3.56 |
4.25 |
M0564580MSV |
4.25 |
4.50 |
| PUMP FLANGE |
PUMP END DATA |
3.50 LENGTH |
4.25 LENGTH |
4.50 LENGTH |
| MOTOR END DATA |
RADIAL CLEARANCE "Z" =
4.15
*RADIAL CLEARANCE "Z" = 4.10 |
| AJ |
BF |
BD |
AK |
|
|
|
|
|
|
|
|
|
|
|
| 5.88 |
7/16 |
6.81 |
4.501 |
XAK |
XAJ2 |
XBF2 |
XAJ4 |
XBF4 |
MOUNT NO. |
CL |
XM |
MOUNT NO. |
CL |
XM |
| USA4F17 |
4
Bolt |
1.782 |
|
|
2.84 |
5/16-18 |
M056504FV |
4.31 |
5.00 |
M056524FV |
4.56 |
5.25 |
| SAE AA |
2
Bolt |
2.001 |
3.25 |
3/8-16 |
|
|
M056502AAV |
4.31 |
5.00 |
M056522AAV |
4.56 |
5.25 |
| SAE A |
2(4)
Bolt |
3.251 |
4.19 |
3/8-16 |
4.12 |
3/8-16 |
M056502AV |
4.31 |
5.00 |
M056522AV |
4.56 |
5.25 |
| SAE B |
2(4)
Bolt |
4.001 |
5.75 |
1/2-13 |
5.00 |
1/2-13 |
M056502BV* |
3.93 |
5.00 |
M056522BV* |
4.18 |
5.25 |
| 80 A2/B4 |
2(4)
Bolt |
80.01mm |
109mm |
3/8-16 |
103mm |
5/16-18 |
M0565080MV |
4.31 |
5.00 |
M0565280MV |
4.56 |
5.25 |
| 80 S4 |
4
Bolt |
80.01mm |
|
|
100mm |
5/16-18 |
M0565080MSV |
4.31 |
5.00 |
M0565280MSV |
4.56 |
5.25 |
| 100 A2/B4 |
2(4)
Bolt |
100.01mm |
140mm |
1/2-13 |
125mm |
3/8-16 |
M05650100MV* |
3.93 |
5.00 |
M05652100MV* |
4.18 |
5.25 |
| PUMP FLANGE |
PUMP END DATA |
5.00 LENGTH |
5.25 LENGTH |
NEMA Frame 182TC thru 256 Vertical Mounting
| OPTION A |
OPTION B |
 |
 |
| Illustration D |
Illustration E |
| This mounting option offers an economical
alternative to OPTION B, but is available with SAE-A pump flanges and smaller only. OPTION
A utilizes the standard horizontal mount and a sealing gasket. To
order OPTION A, specify the Horizontal Pump/Motor Mount number from TABLE 8A and Vertical Gasket number
M182AVG. |
This option utilizes an oversize
mounting flange on the motor end of the mount and requires a larger diameter tank top
opening giving additional working clearances for assembly to reservoir. Mounting OPTION B
is available in the pump/motor length combinations shown in TABLE 13.
To order OPTION B, specify the Vertical Pump/Motor Mount number from
TABLE 13 followed with the letter 'V', as shown in TABLE 13. The required Vertical Gasket number M182BVG is included. |
TABLE 13 - NEMA Frames 182TC - 256TC, 213UC/256UC
| MOTOR END DATA |
RADIAL CLEARANCE "Z" =
5.00
MOUNTING HOLE DAI "T" = 17/32
MOUNTING HOLE BOLT CIRCLE "XT" = 10.25 |
| AJ |
BF |
BD |
AK |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 7.25 |
17/32 |
11.50 |
8.501 |
XAK |
XAJ2 |
XBF2 |
XAJ4 |
XBF4 |
MOUNT NO. |
CL |
M |
MOUNT NO. |
CL |
M |
MOUNT NO. |
CL |
M |
| USA4F17 |
4
Bolt |
1.782 |
|
|
2.84 |
5/16-18 |
M182504FV |
4.31 |
5.00 |
M182524FV |
4.31 |
5.25 |
M182584FV |
5.06 |
5.81 |
| SAE AA |
2
Bolt |
2.001 |
3.25 |
3/8-16 |
|
|
M182502AAV |
4.31 |
5.00 |
M182522AAV |
4.31 |
5.25 |
M182582AAV |
5.06 |
5.81 |
| SAE A |
2(4)
Bolt |
3.251 |
4.19 |
3/8-16 |
4.12 |
3/8-16 |
M182502AV |
4.31 |
5.00 |
M182522AV |
4.31 |
5.25 |
M182582AV |
5.06 |
5.81 |
| SAE B |
2(4)
Bolt |
4.001 |
5.75 |
1/2-13 |
5.00 |
1/2-13 |
|
|
|
M182522BV |
4.50 |
5.25 |
M182582BV |
5.06 |
5.81 |
| SAE C |
2(4)
Bolt |
5.001 |
7.12 |
5/8-11 |
6.38 |
1/2-13 |
|
|
|
M182522CV |
4.50 |
5.25 |
M182582CV |
5.06 |
5.81 |
| 80 A2/B4 |
2(4)
Bolt |
80.01mm |
109mm |
3/8-16 |
103mm |
5/16-18 |
M1825080MV |
4.31 |
5.00 |
M1825280MV |
4.31 |
5.25 |
M1825880MV |
5.06 |
5.81 |
| 80 S4 |
4
Bolt |
80.01mm |
|
|
100mm |
5/16-18 |
M1825080MSV |
4.31 |
5.00 |
M1825280MSV |
4.31 |
5.25 |
M1825880MSV |
5.06 |
5.81 |
| 100 A2/B4 |
2(4)
Bolt |
100.01mm |
140mm |
1/2-13 |
125mm |
3/8-16 |
|
|
|
M18252100MV |
4.50 |
5.25 |
M18258100MV |
5.06 |
5.81 |
| 125A2/B4 |
2(4)
Bolt |
125.01mm |
180mm |
5/8-11 |
160mm |
1/2-13 |
|
|
|
M18252125MV |
4.50 |
5.25 |
M18258125MV |
5.06 |
5.81 |
| PUMP FLANGE |
PUMP END DATA |
5.00 LENGTH |
5.25 LENGTH |
5.81 LENGTH |
| MOTOR END DATA |
RADIAL CLEARANCE "Z" =
5.00
MOUNTING HOLE DIA "T" = 17/32
MOUNTING HOLE BOLT CIRCLE "XT" = 10.25 |
| AJ |
BF |
BD |
AK |
|
|
|
|
|
|
|
|
|
|
|
| 7.25 |
17/32 |
11.50 |
8.501 |
XAK |
XAJ2 |
XBF2 |
XAJ4 |
XBF4 |
MOUNT
NO. |
CL |
M |
MOUNT
NO. |
CL |
M |
| USA4F17 |
4 Bolt |
1.782 |
|
|
2.84 |
5/16-18 |
M182684FV |
6.06 |
6.81 |
|
|
|
| SAE AA |
2 Bolt |
2.001 |
3.25 |
3/8-16 |
|
|
M182682AAV |
6.06 |
6.81 |
|
|
|
| SAE A |
2(4) Bolt |
3.251 |
4.19 |
3/8-16 |
4.12 |
3/8-16 |
M182682AV |
6.06 |
6.81 |
|
|
|
| SAE B |
2(4) Bolt |
4.001 |
5.75 |
1/2-13 |
5.00 |
1/2-13 |
M182682BV |
6.06 |
6.81 |
M182702BV |
6.25 |
7.00 |
| SAE C |
2(4) Bolt |
5.001 |
7.12 |
5/8-11 |
6.38 |
1/2-13 |
M182682CV |
6.06 |
6.81 |
M182702CV |
6.25 |
7.00 |
| 80 A2/B4 |
2(4) Bolt |
80.01mm |
109mm |
3/8-16 |
103mm |
5/16-18 |
M1826880MV |
6.06 |
6.81 |
|
|
|
| 80 S4 |
4 Bolt |
80.01mm |
|
|
100mm |
5/16-18 |
M1826880MSV |
6.06 |
6.81 |
|
|
|
| 100 A2/B4 |
2(4) Bolt |
100.01mm |
140mm |
1/2-13 |
125mm |
3/8-16 |
M18268100MV |
6.06 |
6.81 |
M18270100MV |
6.25 |
7.00 |
| 125 A2/B4 |
2(4) Bolt |
125.01mm |
180mm |
5/8-11 |
160mm |
1/2-13 |
M18268125MV |
6.06 |
6.81 |
M18270125MV |
6.25 |
7.00 |
| PUMP FLANGE |
PUMP END DATA |
6.81 LENGTH |
7.00 LENGTH |
Quick
Selector Guide
General
Information
SAE & Metric Mounts
Horizontal Pump/Motor Mounts
Vertical Pump/Motor Mounts
Pump/Engine Mounts
Welded Steel Mounts
Horizontal Welded Steel Mounts
Vertical Welded Steel Pump/Motor Mounts
Welded Steel Pump/Engine Mounts
Back to the
Magnaloy Home Page
Products |
Shop
On-Line |
Contact Us | Site Index
|
Site
Search
Magnaloy Home Page
This Page Last
modified:
July 07, 2009 11:34 AM
|
